Author: Nihar Industries

As the owner of a woodworking store that manufactures different kinds of doors, you must think about getting a flush door making machine that can help you greatly in your manufacturing goals.

When you are thinking of having a woodworking store, there are some machines that you must have as they can help you to perform your work neatly. One of them is definitely a wood press machine. These machines are mostly used for converting biomass and wood into pellets.

A DD saw machine is a particularly useful addition to any woodworking store that can be used for smoothly trimming the rough edges of the different types of plywood boards and other types of wooden boards.

Are you looking to expand the prospects of your woodworking store by investing in machinery that can help you to further improve your production quality? Then you should certainly get a plywood sanding machine as it can be immensely beneficial for your needs.

When you are thinking of enhancing the efficacy of your woodworking store, there are some things that you can do about it. One of the ways in which you can definitely achieve this goal is by investing in a spindle moulder that can be useful for you in more ways than one.

When you are considering buying some useful machinery from the market that can help accentuate the chances of success for your woodworking business, then it is vital that you consider purchasing an MDF board cutting machine as it is something

Mica pressing is a manufacturing process that is often made use of in the woodworking industry. They are particularly useful when it comes to making doors for various purposes. When it comes to buying a mica pressing machine for your business,

The edge banding is a process by which thin pieces of PVC are glued and banded to panel form Edge Banding Boards or Panels of furniture items and goods.

Stone components such as granite and marble are often used in the construction process within a building and therefore they are regarded as important building materials for any kind of residential, commercial, or public property.

Cleaning Procedure:

• Thoroughly clean the machine with a dry cloth. Do not use water or damp cloth to clean.
• If the part is rusted, we recommend using WD-40 to clean the affected area.

Mechanical Unit:

• Clean the compressor thoroughly. Remove old oil and fill it with fresh oil. Check for belt condition. Switch on and off the compressor and observe for any noise vibrations etc. If nothing is observed, fill the tank and check if auto cut-off and pressure release valve are in working condition.
• Drain the water from the FRL unit. Remove the oil in the FRL unit and fill it with fresh oil to the marked level.
• Check for air pressure in the FRL unit before starting the machine.
• Wherever required thoroughly grease the greasing points. Remove old oil in the lubrication tank and pour fresh oil to the required level. Manually check if lubrication is working.
• Open pneumatic air slowly, there is a possibility the pipe may burst. Add a few drops of oil to the Pneumatic pipeline.
• Move mechanical parts manually if it is a movable part. Check the drive belts.
• Clean Mechanical unit mainlines using a Vacuum pump (Industrial Vacuum Cleaner) or otherwise by hand. Do not use Air Compressor.
• UPS battery might have drained out, then it has to be recharged.
• Check for power cables damages. Check and confirm fuse carriers are ok for the main power supply box
• Switch on the mains. Switch on control voltage and check if all parameters are fine on the monitor. Slowly start the machine and move the axis/bed etc manually. Run the machine in idle condition for some time. Observe for any noise, smoke, etc.
• MOTOR:
1. Initially switch on and switch off immediately. Repeat this 3 times.
2. Next switch on for 5mins & switch off. Repeat twice
3. Switch on for 10 minutes and switch off. Repeat twice.
4. Switch on for 15 minutes and switch off. Repeat twice.
• Do not operate a machine without a trained operator.

Electrical unit:

• Open the panel and check for any broken/loose cable connections.
• Check throughout the machine for any damages, loose parts, and for a cut or damaged cables bitten by rats, etc. We would recommend rat repellants in Electrical panels. Avoid frequent opening of electrical panels.
• Clean Electrical panel mainlines using a Vacuum pump (Industrial Vacuum Cleaner) or otherwise by hand. Do not use Air Compressor.